Prof. A. Lüder
Prof. Dr.-Ing. habil. Arndt Lüder
Chair of Production Systems and Automation
Prof. Dr.-Ing. habil. Arndt Lüder attended the Otto-von-Guericke University at Magdeburg, Germany, and completed his diploma degree in mathematics in 1995 and in mathematics-economics in 1997. From 1995 to 2000 he worked as research engineer at the chair of automation technology at Otto-von-Guericke-University Magdeburg and Martin-Luther-University Halle-Wittenberg were he finished it PhD in 2000. Since 2001 he is working at the IAF. Here he is leading the teaching area factory automation since January 2006 and has finalized its habilitation degree as affiliated professor for distributed control systems in 2007. Since 2017 he is managing head of institute at IAF.
The main focus of his work is on the application of innovative technologies in the area of factory automation such as object-oriented and agent-based architecture and implementation concepts, mechatronical concepts, Engineering methodologies and processes based on them, as well as Ethernet-based communication protocols. Beside that, he is involved in GMA technical committee "Agents in Automation" and the AutomationML alliance.
Current projects
Digital twins for sustainable and resilient production systems - NaRePro
Duration: 01.01.2025 bis 31.12.2027
Sustainability and resilience are important optimization goals for modern production systems. This requires digital twins that enable a modern life cycle assessment of all objects in production systems (products, processes and resources), e.g. on the basis of AI. Existing digital twins were developed for specific use cases and problems and are not generally applicable. In order to enable their use in the digitalization of companies, neutral and cross-application information models, implementation strategies and usage processes for digital twins are needed that enable the optimization of production systems with regard to sustainability and resilience aspects. The NaRePro project aims to close this gap. The basic objectives of the project are (a) the harmonized design of the structure of digital twins for sets of complementary use cases, (b) the definition and prototypical implementation of a creation and usage process for these digital twins, © the application of (a) and (b) to the various use cases in order to be able to improve the effectiveness, efficiency, changeability and sustainability of production systems in particular on the basis of sustainability assessments, and (d) the standardization of the relevant elements of the developed solutions together with IDTA and AutomationML e.V..
The project is funded by the European Regional Development Fund (ERDF) for the project period from 2025 to 2027.
This text was translated with DeepL
AutomationML (4) - Development of a comprehensively usable exchange format
Duration: 01.01.2020 bis 31.12.2026
The AutomationML project was launched on January 1, 2006. As part of the design and implementation process of production systems, a wide variety of design tools are used in the various process phases, each serving specific purposes. This begins with the design of the products to be manufactured using CAD tools, continues with the design of the manufacturing process, e.g. using material flow simulation tools, and ends with the implementation of control code for PLCs or robot controllers using corresponding manufacturer-specific tools. However, the abundance of tools and the wealth of different interfaces they support leads to system breaks and information losses at the transitions between the individual phases of the design and implementation process, which have a significant impact on the runtime and costs of the design and implementation process. In order to minimize this problem, the AutomationML project has set itself the goal of developing a comprehensively usable exchange format for all data relevant to the design and implementation process and its international standardization. This exchange format should ensure the interoperability of various tools along the design and implementation process. The IAF's work in the AutomationML project focuses on the investigation and development of the parts of the exchange format that are necessary for the design of control systems.
Cooperations:
- AutomationML e.V.
This text was translated with DeepL
EtherNet/IP Conformance Test Lab (4)
Duration: 01.01.2020 bis 31.12.2026
The EtherNet/IP Conformance Test Lab project was launched on January 1, 2008. EtherNet/IP is one of the most widely used Ethernet-based industrial protocols. It was developed and is maintained by the Open Device Vendor Association (ODVA). Due to the rapidly growing demand for EtherNet/IP products, the ODVA has commissioned the Center Distributed Systems (CVS) at the IAF of Otto von Guericke University Magdeburg to set up and operate the first European conformance test laboratory for EtherNet/IP products. Within the framework of this conformance test laboratory, devices for industrial use are tested for their conformance to the EtherNet/IP protocol - exclusively on behalf of the ODVA. Based on the experience gained in the application of Ethernet-based technology, the CVS develops extensive knowledge to support industrial users in the implementation of industrial communication systems.
Cooperations
- ODVA, Inc
This text was translated with DeepL
Digital plant modeling with neutral data formats (DIAMOND) Subproject: Consistent, process-oriented data models in the engineering of production systems (KPDM)
Duration: 01.11.2022 bis 31.10.2025
When new products are introduced, existing production systems have to be expanded or modified. New manufacturing processes are derived from new products, which are implemented either manually or using plant technology. This system technology (resources) is therefore directly linked to changes to the product and process. The plant life cycle contains a large number of individual data-processing processes in various engineering disciplines, many of which are design processes. Each of these disciplines already works with digital models. The individual steps build on each other and each discipline consumes information from the previous process. Currently, this information is usually transferred manually, which takes a lot of time and leads to an increased number of errors. This also applies to the entire ecosystem, in which component manufacturers, for example, extract the relevant information from their own engineering and make it available to the entire value chain. However, the current speed of transformation in the automotive industry no longer allows for long project runtimes and negative quality influences. It is therefore necessary to make changes available to all those involved in the process in a timely manner and to enable a common "picture" via an efficient exchange of information. The main objective of the OvGU within the DIAMOND-KPDM project is the development and application demonstration of a procedure for the application-specific creation and use of a system of coordinated domain-specific and cross-domain data models, the so-called Common Data Model, which enables an efficient and effective design of production systems through an efficient and effective transformation, integration and selection of design data.
This text was translated with DeepL
PMV-based analytics for knowledge-driven manufacturing (PMV4Analytics)
Duration: 28.06.2021 bis 30.06.2025
The design of production systems generates a large amount of information that is relevant for the optimal use of the production systems, but is not used today for reasons of the necessary information processing and transfer. The project aims to tackle this problem. Based on cross-engineering process information modeling and a suitable design of system components, a method for the joint acquisition, processing and analysis of engineering and runtime data and its exemplary application in several use cases will be developed.
Sponsor
- FFG Austria via the Austrian Center for Digital Production (CDP)
Cooperations
- [Vienna University of Technology
- Volkswagen
This text was translated with DeepL
Completed projects
Workflow automation in order processing (ATAautoWorkflow)
Duration: 01.04.2024 bis 31.03.2025
The aim of the project is to identify possibilities for the systematic automation of order processing in a medium-sized steel construction company in the field of special machine construction. Based on the product-process-resource modeling method and using the internationally standardized storage format AutomationML, the project will investigate how the automated step-by-step creation and execution of sales documents and production plans can be carried out on the basis of a detailed design. On the one hand, all important factors for a medium-sized company with regard to economic, qualitative, personnel-related and technological factors are to be taken into account and, on the other hand, simple applicability by management personnel is to be made possible.
In order to validate the automation options identified, a software prototype is to be developed with which the partner company can test the procedures and data models developed with regard to their practical applicability.
Funding body: FFG Austria via the Austrian Center for Digital Production (CDP)
Cooperations:
- [Vienna University of Technology
- Austrian Center for Digital Production (CDP)
- ATA Anlagentechnik Aschersleben GmbH & CO. KG
This text was translated with DeepL
Workflow automation in order processing in technical sales
Duration: 01.07.2023 bis 31.03.2024
The aim of the project is to identify possibilities for the systematic automation of order processing in a medium-sized steel construction company in the field of special machine construction. Based on the product-process-resource modeling method and using the internationally standardized storage format AutomationML, the project will investigate how the automated step-by-step creation and execution of sales documents and production plans can be carried out on the basis of a detailed design. On the one hand, all important factors for a medium-sized company with regard to economic, qualitative, personnel-related and technological factors are to be taken into account and, on the other hand, simple applicability by management personnel is to be made possible.
To validate the automation options identified, a software prototype is to be developed with which the partner company can test the procedures and data models developed with regard to their practical applicability.
This text was translated with DeepL
Behavioral analysis of flexible components for handle-in-the-box systems
Duration: 01.06.2023 bis 31.12.2023
The aim of the project is to research the behavior of flexible parts in robot-based grip-in-the-box (rGiK). RGiK applications for rigid components, especially metal parts, have been realized in research and are in the early stages of application in the automotive industry. They are based on the reliable detection of the position of the workpieces to be handled, which then enables precise gripping. The fixed shape of the component to be handled plays an important role here, enabling pattern matching for position detection.
Flexible components do not have these stability properties. Their position cannot be detected by simple pattern matching. The research project will evaluate how the detection and handling systems must be controlled in order to enable rGiK for flexible parts and where current hardware and software limitations exist that could motivate further research.
This text was translated with DeepL
Automation of manual assembly on the basis of low-cost systems
Duration: 01.01.2022 bis 31.03.2023
In many areas of industrial production, assembly processes are still carried out manually today. In particular, low-skilled personnel are employed here, whose remuneration is only slightly above the minimum wage. As a result of the increase in online trade, the general development of the age pyramid and the general increase in personnel qualifications, the number of workers available for manual assembly is decreasing.
The aim of the project is to develop strategies for small and medium-sized companies to deal with this personnel problem using practical examples. The focus is on methods for analyzing the automation of manual assembly steps on the basis of low-cost systems that enable a prompt ROI from the saved personnel costs.
Cooperation partner: BETOMAX® systems GmbH & Co. KG
This text was translated with DeepL
SBA-K1 COMET Zentrum interacting Cristian Doppler Lab Lecurity and Quality Improvement in the Production System Lifecycle (CDL-SQI)
Duration: 01.04.2018 bis 31.03.2023
Design processes for production systems are characterized by engineering services in which a wide variety of engineering disciplines are involved with specialized design tools and in which a wide variety of design results must be consistently exchanged between these design tools. To date, various technologies have been developed for this information exchange, which can fulfill different data exchange requirements, for example with regard to information structuring, information security and information consistency.
The aim of the project is to bring some of these technologies together in a common scenario and to enable companies using them to gradually adapt their design processes to the use of this set of technologies. The internationally standardized data exchange format AutomationML (according to IEC 62714) will be of particular importance.
Sponsor
- Austrian Federation
Cooperations
- [Vienna University of Technology
- SMS Group
- STIWA Group
This text was translated with DeepL
Simulative analysis system for handle-in-the-box systems
Duration: 01.11.2022 bis 31.12.2022
The aim of the project is the conception and prototypical implementation of a simulative analysis system for the evaluation of the reachability of a target point set for "reach into the box" applications in car body manufacturing. The aim is to answer the question: Can a robot reach a list of points without collision?
This text was translated with DeepL
INTEGRATE - Open service platform for end-to-end engineering and 3D technologies
Duration: 01.02.2017 bis 31.01.2020
A fundamental claim of Industry 4.0 is the integration of future-oriented digital technologies in industrial applications with the aim of significantly improving the efficiency and quality of the corresponding applications. The focus here is on the use of technologies available today or in the near future in flexible value creation networks. In order to increase efficiency, it is necessary to network the various parties involved in the life cycle of production systems - from product and production system planners to plant operators - using data technology and to overlay the real products and production resources with a digital image. This enables scenarios such as making early statements about feasibility, manufacturing costs and production capacities for products or the autonomous adaptation of production resources.
The aim is to develop a platform that enables a network of design tools that are not synchronized via a common database system to communicate with each other via planning objects. A corresponding platform is to be developed on the basis of the AutomationML data exchange format, which enables cooperative, cross-company engineering. Services that support object-oriented data exchange are to be provided on this platform, both for the exchange of planning data and for the integration and evaluation of runtime data.
Project partners
- INPRO Innovationsgesellschaft für fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH (consortium management)
- FZI Research Center for Information Technology at the Karlsruhe Institute of Technology [Otto von Guericke University Magdeburg
- ABB Asea Brown Boveri Ltd
- logi.cals automation solutions & services GmbH
This text was translated with DeepL
AutomationML (3)
Duration: 01.01.2014 bis 31.12.2019
During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.
The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.
The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.
Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org
EtherNet/IP Conformance Test Lab
Duration: 01.01.2018 bis 31.12.2019
EtherNet/IP is one of the most used Ethernet based industrial communication protocols. It has been developed and will be maintained by Open Device Vendor Association (ODVA). Following the fast increasing request for EtherNet/IP based products, ODVA has authorised the Centre Distributed Systems (CVS) at IAF of Otto-von-Guericke University Magdeburg, Germany, to establish the first European conformance test lab for EtherNet/IP products. Within this conformance test lab CVS will execute conformance tests for devices intended to be used within industrial applications exploiting EtherNet/IP based communication to prove the protocol conformance of them. These tests will be executed only by order of ODVA. On the basis of experiences gained in the application of Ethernet-based technology the CVS develops extensive knowledge resources to support industrial users in the implementation of industrial communication systems. www.iaf-bg.ovgu.de/odva_tsp
Development and integration of interdependent agent systems for decentralized production planning and control
Duration: 18.01.2016 bis 21.12.2018
The dissertation examines the question of how agent-based distributed control systems can adequately map the growing complexity of controlling manufacturing systems and their increasing modularization and networking. The aim is to find a method that can be used to design, implement and integrate modular control systems for agent-based modular production systems step by step.
This text was translated with DeepL
Analysis and evaluation in the field of applied mechatronic engineering of industrial plants (AMENIA) - Advanced Manufacturing Process Chain(AMProC)
Duration: 01.01.2015 bis 30.09.2018
In the increasingly complex production of increasingly complex products, the identification of dependencies between production processes and product properties (or product design) and their use to control production processes is a growing challenge.
The aim of the research is to provide procedures and application knowledge that enable an integrated view of the product and production process in the design of production systems on the one hand and the design of adaptable control structures for production systems on the other. The aim is to shorten the time-to-market of products, improve production efficiency and increase product quality.
Cooperation partner:
Siemens AG
This text was translated with DeepL
A novel migration approach towards decentralized automation in cyber-physical production systems
Duration: 01.01.2015 bis 30.09.2018
The doctorate examined the question of what a migration strategy must look like in order to gradually convert an existing control system into an Industry 4.0-oriented control system. A procedure based on systems engineering was developed that analyzes the relevant production system in each development step and optimizes it with a view to a long-term development strategy, without disregarding the short-term benefits of such system changes.
This text was translated with DeepL
Methods of cross-project reuse in plant construction
Duration: 01.03.2016 bis 28.02.2018
The dissertation deals with the problem of the reuse of engineering information in the context of plant design of manufacturing systems, especially in the field of conceptual design and realization in the automotive industry. The topic aims at a novel method for the identification, utilization and documentation of reusable units in the context of car body design in the automotive industry. A methodology for reuse for design purposes within the life cycle of the same production system was developed as well as a methodology for reuse across the life cycle, the applicability of which was demonstrated in several examples.
This text was translated with DeepL
EtherNet/IP Conformance Test Lab
Duration: 01.01.2013 bis 31.12.2017
EtherNet/IP is one of the most used Ethernet based industrial communication protocols. It has been developed and will be maintained by Open Device Vendor Association (ODVA). Following the fast increasing request for EtherNet/IP based products, ODVA has authorised the Centre Distributed Systems (CVS) at IAF of Otto-von-Guericke University Magdeburg, Germany, to establish the first European conformance test lab for EtherNet/IP products. Within this conformance test lab CVS will execute conformance tests for devices intended to be used within industrial applications exploiting EtherNet/IP based communication to prove the protocol conformance of them. These tests will be executed only by order of ODVA. On the basis of experiences gained in the application of Ethernet-based technology the CVS develops extensive knowledge resources to support industrial users in the implementation of industrial communication systems. www.iaf-bg.ovgu.de/odva_tsp
Agent-based mechanism for smart distributed dependability and security and control of Cyber-Physical Production Systems
Duration: 01.01.2016 bis 22.12.2017
The doctorate deals with the application of multi-agent systems for the implementation of Industry 4.0 structures and the resulting possible increase in the flexibility of production systems. The result is a generic architecture that can be used to further develop existing control systems in the direction of Industry 4.0 with little effort.
This text was translated with DeepL
Methods and tools for planning and implementing the international distribution of engineering efforts for the design and realization of technical systems
Duration: 01.09.2015 bis 30.09.2017
The dissertation deals with methods and tools for planning and implementing the international distribution of engineering expenses for the design and realization of technical systems and validates these methods using examples primarily from the engineering of large-scale power generation and distribution plants. As a result of the doctorate, entry points are created for the controlled implementation and monitoring of internationalization projects in the engineering of technical systems.
This text was translated with DeepL
Recovery Planning Method for Production SystemsFrom March 2012 to September 2017
Duration: 01.03.2012 bis 30.09.2017
The doctorate looks at the end of the life cycle of production systems, in particular the dismantling of plants. The research question being investigated is what a dismantling planning process based on end-to-end modeling of production systems and their components might look like and what information relating to an Industrie 4.0 component should be collected over the course of a production system's life in order to enable optimal dismantling and recovery of these components. The result was a methodology based on AutomationML that makes the necessary planning data available and uses it for optimized dismantling planning.
This text was translated with DeepL
AutomationML 4.0
Duration: 01.01.2016 bis 30.06.2017
The main objectives of the joint project "AutomationML - Part 4 as a control technology language for Industry 4.0" are to support the national and international standardization of the control technology-relevant part of the AutomationML data format and to disseminate the results of standardization in order to maximize the inherent potential. To this end, data exchange requirements are recorded in the industrial environment and transferred into solutions together with various user organizations.
Funded by the Federal Ministry for Economic Affairs and Energy (funding programme: Transfer of research and development results (R&D) through standardization)
This text was translated with DeepL
Data Exchange for Physics-based Simulation of Material Handling Systems in Digital Factory
Duration: 01.01.2015 bis 28.02.2017
This doctoral thesis deals with the use of AutomationML in the simulation of logistics systems. A methodology was developed to use AutomationML to transport the information required to describe the physical behavior of logistics systems. On the other hand, prototypes for tool interfaces were implemented that use this data format and realize the information transport in tool chains.
This text was translated with DeepL
Agents and SCT based self* control architecture for production systems
Duration: 01.01.2014 bis 30.11.2016
The doctorate deals with the application of multi-agent systems for the implementation of Industry 4.0 structures and the resulting possible increase in the flexibility of production systems. The result is a generic architecture that can be used to further develop existing control systems in the direction of Industry 4.0 with little effort.
This text was translated with DeepL
Generic, protocol-independent configuration tool for industrial communication networks (GecKo)
Duration: 01.01.2015 bis 30.06.2016
The scope of the research project Gecko is allocated within the problem range of communication within industrial facilities. The aim of the project is the creation of a novel methodology and necessary tools to support or enable protocol- and architecture crossing design, configuration and documentation of arbitrary industrial communications networks. Especially SMEs will be enabled to meet high individualization of kind and characteristics of technologies within the use cases of their customers. Therefore, methodologies and data models for the engineering of industrial communication structures are analyzed, a methodology is developed for integration and consistent use of these data, suitable specifically built tool components are integrated within one tool, and their applicability is evaluated.
GecKo-FA: This partial project focusses on the application field of factory automation and strives to lessen the duration of installation and commisiioning of the communications systems by 20%, therefor to limit the error rate and improve its documentation. (DEHOF)
GecKo-CB: The partial project GecKo-CB focusses on the development and execution of commuications system models within neutral format, which are qualified for Gecko project parts and beyond that for the universal use within arbitrary applications. (OvGU)
GecKo-PV: The partial project GecKo-PV focusses on the application field of photovoltaics. It strives to shorten the design of PV-systems heavily by standardized processes and library based layout. (iPLON)
Improvement of systematic reuse in the engineering of automated plants and systems - Concept and documents for consulting projects according to VDI 3695
Duration: 01.02.2013 bis 31.03.2014
In industrial practice, different technological, economic, legal and social trends are currently coming together, which have led or are currently leading to a change in the way engineers who design and use production systems deal with them.
A technologically and economically motivated trend is the growing demand for flexibility and adaptability of production systems, which enables engineers to produce a wider range of products in variable output quantities. This trend has an impact on the economic significance of individual phases of the life cycle of production systems and their overall economic balance.
The improvement of design processes is an important trend motivated by this, which is particularly aimed at reducing the creation costs of production systems. In response to this, various research, development and standardization efforts have attempted to develop methods for efficiently designing the design process of production systems and evaluating the efficiency of the current status of these processes.
A particularly prominent result of these efforts is the VDI guideline series 3695 - Engineering of plants - Evaluation and optimization of engineering. This guideline defines possible target states for design organizations (companies, parts of companies or cooperating companies that carry out a joint design process) and describes criteria for achieving them. On the basis of this guideline and other analysis methods developed at the Institute of Ergonomics, Factory Automation and Factory Operation (IAF), such as the 4D analysis method, it is possible to identify the potential that individual companies have for organizing their work more effectively in the context of design processes and to generate recommendations for action on this basis.
The aim of this project, in cooperation with the Austrian logi.cals GmbH and the Christian Doppler Laboratory Software Engineering Integration for Flexible Automation Systems at the Vienna University of Technology, is to develop and create concepts and documents for corresponding consulting projects in accordance with VDI 3695 to improve systematic reuse in the engineering of automated plants and systems, particularly against the background of the development of control applications. The task of the consulting projects should be to identify concrete measures based on a status analysis of a company under consideration and the design processes carried out in it, which enable a more effective design of design processes.
This text was translated with DeepL
AutomationML (2)
Duration: 01.04.2009 bis 31.12.2013
During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.
The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.
The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.
Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org
Analysis and Evaluation in Fields of Applied Mechatronic Engineering for Industrial Plants (AMENIA) / Model based Methods for Control (MOMA)
Duration: 07.10.2010 bis 30.09.2013
A special challenge within the engineering of production systems is the methodological consistency of the engineering along the complete life cycle of the production system and the use of models and tools within. The consistent use of model based methods and mechatronic ideas provides main advantages to optimise the engineering of technical system in addition to strategic and process oriented measures. In cooperation with industrial partners, practical concepts and methods of model based engineering for control solutions are developed and evaluated in the field of model based engineering of industrial systems.
Erstellung einer Studie über Entwicklungspotenziale für Steuerungsprogrammierwerkzeuge
Duration: 01.02.2013 bis 30.09.2013
The focus of the project is on the efficient design of production system design processes and the control systems they contain, as well as their influence on design tools.
The aim is to investigate the requirements for modern design tools for the development of control applications as part of the design process for production systems, to prepare, conduct and evaluate an online survey on the topic and to develop recommendations for improving the development process in the area of programming systems.
This text was translated with DeepL
Development and prototypical implementation of a tool for virtual commissioning in all phases of the engineering process by combination of visualization systems and behavior modeling - model integration (EVIE-model)
Duration: 01.03.2012 bis 31.08.2013
The project operates in the area of engineering processes and engineering tools for production systems and especially in the area of virtual commissioning in the context of the digital factory. It aims at creating a novel tool for the virtual commissioning of production systems in various phases of the engineering process. For this purpose the project plans to develop an information model for the integration of visualization and behavioral description information, a visualization method, a behavioral simulation methodology and a use methodology and implement a prototype based on existing tools. The resulting tool enables particularly small and medium sized companies to apply their specific tools more efficiently in the engineering process of production systems and to claim their specific ability of improving the market position in comparison to other tools. In the field of virtual commissioning project results enable the project partner to achieve technological leadership.
EtherNet/IP Konformitäts-Test-Labor (1)
Duration: 01.01.2008 bis 31.12.2012
EtherNet/IP ist eines der meist genutzten Ethernet basierten Industrieprotokolle. Es wurde von der Open Device Vendor Association (ODVA) entwickelt und wird von dieser gepflegt. Auf Grund der rasch wachsenden Nachfrage nach EtherNet/IP Produkten hat die ODVA das Center Verteilte Systeme (CVS) am IAF der Otto-von-Guericke-Universität Magdeburg beauftragt, das erste europäische Konformitäts-Test-Labor für EtherNet/IP-Produkte zu errichten und zu betreiben. Im Rahmen dieses Konformitäts-Test-Labors werden - ausschließlichen im Auftrag der ODVA - Geräte für den industriellen Einsatz auf ihre Konformität zum EtherNet/IP Protokoll getestet. Auf der Basis der gesammelten Erfahrung bei der Anwendung Ethernet basierter Technologie entwickelt das CVS weit reichende Wissensbestände zur Unterstützung industrieller Anwender bei der Umsetzung von industriellen Kommunikationssystemen.
www.iaf-bg.ovgu.de/odva_tsp
MONA Development of a mobile network analysis device for industrial communication systems
Duration: 01.11.2010 bis 30.04.2012
Aims of the MONA project are the development of an advanced diagnosis and supervision technology for industrial Ethernet-based communication systems and the generation of a knowledge based distributed analysis method for these systems. Based on both, an analysis of the communication system and the control system it is integrated within will be possible. Main results of the project are a tool and a method for communication system analysis within commissioning, use and maintenance of industrial production systems.
MEDA Mechatronic oriented data exchange within production system engineering
Duration: 01.08.2010 bis 31.10.2011
The engineering process of industrial production systems is characterised by a required reduction of engineer?s duration and an increased flexibility of the production system itself. To deal with these challenges a mechatronical idea based and tool supported engineering process for production systems is developed currently. Within this process mechatronical units are the main entities of interest. Main foundation of such a mechatronical engineering process is a, with respect to data exchange consistent tool chain, enabling a lossless exchange of engineering results. Aim of this project is the development of a data exchange format based on existing standards. This format has to be able to store all relevant information on mechatronical units. Exploiting this format an interface engine will be developed enabling tools to read data from and write data to the data exchange format. Within the project a prototypical implementation of the interface engine will be used to connect the tools taraVRbuilder and taraVRcontrol.
Security und Administration in Industrial Ethernet e.V. (SecIE)
Duration: 01.01.2008 bis 31.12.2009
Security und Administration in Industrial Ethernet e.V. (SecIE) is anindustrial association aiming at enforcing the standardisation in theareas of IT-Security and Administration of communication systems withinfactory automation. Therefore SecIE develops technical guidelinesregarding basic for end users and system integrators, the customisationof office IT solutions for the industrial application, securityconcepts and architectures, and Interfaces. Additionally, SecIEprovides knowledge about risks, differences among security concepts,and technological possibilities.
In the course of the work for SecIECVS will develop guidelines and knowledge within the fields ofinteroperability of devices within security architectures and datasecurity relevant use cases of industrial communication. In additionCVS will assist SecIE within its administrative activities.
www.secie.org
AutomationML (1)
Duration: 01.10.2006 bis 31.12.2008
During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.
The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.
The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.
Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org
PABADIS PROMISEPABADIS based Product Oriented Manufacturing Systems for Re-Configurable Enterprises
Duration: 01.08.2005 bis 31.07.2008
Future manufacturing will require high flexibility/adaptability and speed with respect to organisation of production and supply-chain management and require an increasing amount of services and inter-company collaboration. These future requirements especially concern control and networking of embedded control systems of manufacturing enterprises at ERP (office), MES (factory control) and production level. Taking these requirements into account and building on top of the successful FP5 Project PABADIS, the PABADIS"PROMISE (P2) project extends the idea of distributed control to an innovative architecture which incorporates both resource and product. With the project"s new paradigm "The Order is the Application" which stipulates a correspondingly innovative control and networking architecture across all three levels, P2 will combine European and international forces. As designated outcome the P2 project will develop a new control architecture based on distributed intelligence, a new manufacturing ontology, a first embedded Real-Time agent platform for control, a new generation of RFID"s, a new generation of field control devices, and building blocks for a new generation of Enterprise Resource Planning systems. At ERP level new functions together with new interfaces will be developed, enabling direct access from ERP level to the field control system following the new P2 ontology, which provides a framework for product and production process description and comparison. Both Manufacturing Execution System (MES) level and Field Control level will be completely decentralised. Innovative to current practice and research, the MES level will be decentralised into Mobile Software Agents which are located (stored) in smart Tags which are attached directly to the product (Agent on RFID). Once the product arrives at a processing station, the Agent is read out of the RFID Tag and invoked to ensure product processing, further planning based on the ontology based descriptions, and further necessary transport steps. For this, a first Embedded Real-Time Agent Platform will be developed. To be flexible with regard to the logical usage of the plant s machinery, the product dependent control part (for which a new manufacturing ontology will be developed) has to be provided individually for each product in the moment of production and is also located within the Mobile Software Agent, respectively in the RFID Tag. The Field Control level, correspondingly, is reduced to Residential Software Agents, which represent the physically possible production process. Only these fine grained control building blocks are permanently located on the resource control devices. They will behave as drivers for the physics of the resources similar to drivers for PC periphery systems like printers and modems. Hence, the PABADIS"PROMISE project will provide basic architectures, methodologies and technologies for the long term innovation of manufacturing systems.
AgentAut - Agent based interaction architecture for distributed control systems
Duration: 01.07.2005 bis 30.06.2007
The increase of flexibility, the enlargement of maintenance capabilities, and the reduction of design efforts are main trends within industrial manufacturing applications during the last 20 years. Thereby, control systems have played an important role. Several research and development activities have been made to provide means for the design of flexible, easy implementable, and easy maintainable control systems. They have resulted in two main architectures, order control systems and process control systems. Both architectures will use design pattern for distributed control systems, but these design pattern are related to the individual architectures and thereby different and not applicable in the other architecture. Order control systems are mainly agent based and will navigate manufacturing orders at runtime through a system of manufacturing resources. Process control systems are mainly function block oriented and consider distribution and coordination aspects of control decisions to control devices. Hence, order control systems are related to the higher levels of the automation pyramid and process control systems to lower levels of the automation pyramid. These trends have resulted in breakages of the used technologies and structures during the design and implementation especially between the different levels of the automation pyramid. Function blocks and agent systems, the mainly used technologies of both control architecture groups, seam to be not combinable by technical, technological, and architectural reasons. The overcoming of this problem is one of the most important challenges of the current research in the control field today. The aim of the AgentAut project is the development of an integrated methodology for distributed control systems under involvement of order and process control systems. Therefore, AgentAut will combine the main architectural building blocks of both control architecture types of distributed control systems, i.e. agents and function blocks, to a consistent control architecture with a dedicated control system design methodology.
JAKOBI - java-based and components-based industrial control
Duration: 01.05.2004 bis 30.07.2006
The JAKOBI project aims at the development of new control devices based on the programming language Java, which enables a platform independent application development, plug-and-play mechanisms, web based management functionalities and supports the usage in distributed control systems. For that purpose a consistent package of hardware, Java Virtual Machine, runtime environment and application building blocks will be developed. Important parts oft that development are the design and specification of a framework of basis building blocks for the application development, mechanisms for a flexible, easy and user-friendly device management as well as the presentation of a migration path between the present technology in industrial control and the new object-oriented control. JAKOBI will make a far-reaching contribution for the flexibility of control systems and simplification of design, re-design and implementation of control systems.
Handbook Industrial Ethernet
Duration: 01.07.2005 bis 30.09.2005
Im Rahmen dieses Projektes wird für die IAONA (Industrial Automation Open Networking Alliance) das nunmehr dritte Handbuch zum Thema Industrial Ethernet im IAF erstellt. Das Handbuch, das in englischer Sprache erscheint, ist mittlerweile in über 50 Ländern der Erde verteilt wurden. Das Handbuch gibt dem Anwender einen umfassenden und praxisorientierten Überblick über den Stand der Technik im Bereich Industrial Ethernet. Neben den technischen Grundlagen des Ethernet vermittelt das Dokument unter anderem Wissen der Themenbereiche Verkabelung, Security, Safety, Echtzeit und Wireless. Zudem werden alle 10 in der Normung der IEC befindlichen Ethernet-Protokolle vorgestellt.
Wissensbausteine für das VSEK-Portal
Duration: 01.07.2005 bis 30.09.2005
Ziel des Projektes ist die Darstellung des Standes der Technik und der Forschung in den Bereichen "Funktionales Engineering" und "Software-Engineering mit Ethernet in der Automatisierungstechnik", die dann vom Fraunhofer ISIE in Form von sogenannten Wissensbausteinen für die Wissensdatenbank "www.software-kompetenz.de" zur Verfügung gestellt werden. Schwerpunkte der Arbeit sind vor allem die Bereiche: Verteilte Intelligenz in der Automation, modernste Kommunikationstechnologien (Ethernet-Technologie u.a.), modernste Programmiertechnologien, modernste Steuerungshardware sowie neuartige Steuerungsentwurfsmethodiken.
MODYMA
Duration: 01.12.2001 bis 31.05.2004
The project MODYMA subject is the modular development of high-dynamic, highly accurate filinf machine tools, which combine the following innovative ideas:- reduction of weight of the moving items provided by the manufacturing of the machine structure in mineral cast- increased dynamics and precision of the machine due to the employment of linear motors as direct drive on all linear axis- essential improvement of human-machine-interlinks by means of an integration of controlling and programming system as well as web based management The first essential component of the project is the development of an agent-based product management from the product erection in CAD over the generation of controlling programmes in NC-programming devices up to the product revision on the CNC-machine. The second relevant component is the development of a system providing the web based management of CNC-machines.In both components, the latest IT-technologies will be integrated in the surroundings of the CNC-controlling technology, and therefore the handling of CNC-machines and the interaction of human and machine simplified.
PABADIS - Plant automation based on distributed systems
Duration: 01.12.2001 bis 31.01.2004
The aim of PABADIS is to develop new plant automation structures and concepts which can be used to build flexible production sites. Such automation system consists of decentralised, independent, intelligent, and autonomous objects which represents the processing functions of physical (drilling, milling, assembly, or painting a work piece) and logical (calculating a further schedule or searching for next processing unit) nature and products agents for product description and self-handling.
SIF
Duration: 01.10.2000 bis 31.05.2003
The adaptable transport system: Development of modular components for material flux systems delivering seperately packed articles The main focus of this research project is the development of modular components for material flux systems delivering seperately packed articles in view of material flux, information flux and power transmission aimed at attaining the adaptability in transport systems. For achieving the adaptability in production systems, which is almost already attained as regards to the organizational area, an entirely modular-constructed material flux system shall be designed and transposed as a prototype. Such modular-constructed components will render it possible - both regarding the physical material transport using profiles "from the construction kit" and regarding the information flux using distributed systems in the field range as well as through engines with integrated power kit and through a software-, particularly objective finding strategy suited to this strictly modular-constructed concept - to carry out systems that manage to work entirely without switchbox and convert the demand for adaptability on a technical level, too.
2024
Book chapter
Integration verschiedener Informationstechnologien in der Verwaltungsschale am Beispiel von AAS und AutomationML
Lüder, Arndt; Blume, Jan; Schleipen, Miriam; Freund, Matthias; Hoffmann, David; Gupta, Pooja
In: Entwurf komplexer Automatisierungssysteme - Magdeburg : Institut für Automation und Kommunikation e.V., An-Institut der Otto-von-Guericke-Universität Magdeburg ; Jumar, Ulrich *1959-* . - 2024, insges. 10 S. [Tagung: 18. Fachtagung "Entwurf komplexer Automatisierungssyteme", EKA 2024, Magdeburg, 14.-15. Mai 2024]
Configuring and validating multi-aspect risk knowledge for Industry 4.0 information systems
Biffl, Stefan; Kroptschek, Sebastian; Meixner, Kristof; Hoffmann, David; Lüder, Arndt
In: Advanced Information Systems Engineering Workshops , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Almeida, João Paulo A., S. 492-508 - (Lecture notes in computer science; volume 14663) [Konferenz: 36th International Conference on Advanced Information Systems Engineering, CAiSE 2024, Limassol, Cyprus, June 3–7, 2024]
Realizing consistent digital twins by combining different data exchange technologies
Lüder, Arndt; Schleipen, Miriam; Hoffmann, David; Blume, Jan; Freund, Matthias; Gupta, Pooja
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
AutomationML-based risk modeling for decision support in engineering lifecycles
Hünecke, Paula; Binder, Christoph; Hoffmann, David; Lüder, Arndt
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 6 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
A domain-specific language extension for incorporating resource capability modeling into RAMI 4.0
Riedmann, Sarah; Binder, Christoph; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Enhancing production system conceptualization with PPR modeling
Hoffmann, David; Gudder, Ranjitkumar; Hünecke, Paula; Lüder, Arndt
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Development of PPR-based basic elements for methodical combination to generalist product twins in basic engineering for SME
Hansch, Kevin; Lüder, Arndt; Hoffmann, David
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Integrating domain expertise into dynamic digital models - a methodology for behaviour-driven production modelling
Garg, Ishita; Hoffmann, David; Lüder, Arndt; Rudolph, Marco
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Identifying required knowledge for production system digitalization projects
Lüder, Arndt; Hoffmann, David; Biffl, Stefan; Meixner, Kristof
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 6 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Integrated engineering data transformation - an AutomationML-based approach for efficient data exchange
Gudder, Ranjitkumar; Hoffmann, David; Hünecke, Paula; Lüder, Arndt
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Towards a JSON-serialization for AutomationML
Hoffmann, David; Juhlin, Prerna; Gudder, Ranjitkumar; Lüder, Arndt
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Objective method-based requirement gathering for digital data logistics processes in industrial projects
Hansch, Kevin; Große-Kreul, Alexander; Lüder, Arndt; Kuhlenkötter, Bernd
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Representing property dependencies within AutomationML based digital twins
Lüder, Arndt; Hoffmann, David; Gudder, Ranjitkumar; Biffl, Stefan; Meixner, Kristof
In: 2024 IEEE 29th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2024 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 29th International Conference on Emerging Technologies and Factory Automation, ETFA, Padova, Italy, 10-13 September 2024]
Integration des Menschen in Szenarien der Industrie 4.0
Lüder, Arndt
In: Handbuch Industrie 4.0 , 3rd ed. 2024. - Berlin, Heidelberg : Springer Berlin Heidelberg ; Vogel-Heuser, Birgit, S. 139-153
AutomationML in a Nutshell
Lüder, Arndt; Schmidt, Nicole
In: Handbuch Industrie 4.0 , 3rd ed. 2024. - Berlin, Heidelberg : Springer Berlin Heidelberg ; Vogel-Heuser, Birgit, S. 827-874
Peer-reviewed journal article
Towards optimization methods for order data management - a case study of a medium-sized special purpose machinery manufacturer
Hansch, Kevin; Lüder, Arndt; Hoffmann, David
In: IFAC-PapersOnLine / Internationale Förderung für Automatische Lenkung - Frankfurt : Elsevier, Bd. 58 (2024), Heft 19, S. 121-126
Operator-integrated cluster analysis for production quality control
Hoffmann, David; Lüder, Arndt; Biffl, Stefan
In: IFAC-PapersOnLine / Internationale Förderung für Automatische Lenkung - Frankfurt : Elsevier, Bd. 58 (2024), Heft 19, S. 1288-1293
Lean Empowerment im digitalen Ökosystem - Kulturwerte in technische Anforderungen übersetzen
Karch, Sabrina; Lüder, Arndt
In: Industry 4.0 Science - Berlin : GITO mbH Verlag für Industrielle Informationstechnik und Organisation, Bd. 40 (2024), Heft 2, S. 32-39
Evaluation methodology for selecting data exchange technologies for plant design processes
Große-Kreul, Alexander; Hansch, Kevin; Drees, Tobias; Lüder, Arndt; Kuhlenkötter, Bernd
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 130 (2024), S. 1130-1136
Dissertation
Ableitung einer ganzheitlichen Transformationsstrategie zur Realisierung von Datendurchgängigkeit im Anlagenentstehungsprozess
Listl, Carmen; Lüder, Arndt; Haase, Tina
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2024, 1 Online-Ressource (xix, 290 Seiten, 5,75 MB) [Literaturverzeichnis: Seite 229-254][Literaturverzeichnis: Seite 229-254]
Model-driven basic engineering of flexible production systems with the RAMI toolbox
Binder, Christoph; Lüder, Arndt; Beyer, Christiane
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2024, 1 Online-Ressource (xiv, 244 Blätter, 10,05 MB) [Literaturverzeichnis: Blatt 226-244][Literaturverzeichnis: Blatt 226-244]
Ideales Informationsmodell für die Übergabe digitaler Anlagenmodelle aus dem Engineering in den Fabrikbetrieb
Langosch, Martin; Lüder, Arndt
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2024, 1 Online-Ressource (140, xxii Seiten, 7,63 MB) [Literaturverzeichnis: Seite i-x][Literaturverzeichnis: Seite i-x]
Methodik zur virtuellen Systemintegration im industriellen Anlagenbau
Müller, Ralph Klaus; Jumar, Ulrich; Lüder, Arndt
In: Düsseldorf: VDI Verlag GmbH, Dissertation Otto-von-Guericke-Universität Magdeburg 2024, XII, 147 Seiten - (Fortschritt-Berichte VDI; Reihe 10, Informatik/Kommunikation; Nr. 885), ISBN: 978-3-18-388510-7 [Literaturverzeichnis: Seite 138-147][Literaturverzeichnis: Seite 138-147]
2023
Book chapter
Approach for identifying data usage information objects for the later implementation in production environments: Enabling a logic for the information modelling based on use cases using a conversation concept
Nowacki, Natalie Samanta; Müller, Ralph Klaus; Grossmann, Daniel; Lüder, Arndt
In: ICIEAEU '23 - New York,NY,United States : Association for Computing Machinery . - 2023, S. 169-175 [Konferenz: 10th International Conference on Industrial Engineering and Applications, Rome, Italy, January 9-11, 2023]
Model-driven engineering of flexible production systems with the RAMI toolbox
Binder, Christoph; Calà, Ambra; Hoffmann, David; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt
In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]
Towards test-driven performance validation of a flexible cyber-physical production system
Biffl, Stefan; Meixner, Kristof; Hoffmann, David; Winkler, Dietmar; Lüder, Arndt
In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]
Integrated production quality and security analysis
Hoffmann, David; Lüder, Arndt; Weidlinger, Rene; Biffl, Stefan
In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]
Towards case-based reuse of FMEA models for complex production systems
Hoffmann, David; Hünecke, Paula; Lüder, Arndt; Biffl, Stefan
In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]
Consistent extension of networks of digital representations of production system assets
Lüder, Arndt; Hoffmann, David; Meixner, Kristof; Hünecke, Paula; Biffl, Stefan
In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]
Facilitating FMEA investigation of industrial systems during basic engineering with RAMI 4.0
Hünecke, Paula; Binder, Christoph; Hoffmann, David; Lüder, Arndt; Neureiter, Christian
In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 7 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]
Validating production test scenarios with cyber-Physical system design models
Biffl, Stefan; Hoffmann, David; Kiesling, Elmar; Meixner, Kristof; Lüder, Arndt; Winkler, Dietmar
In: 2023 IEEE 25th Conference on Business Informatics (CBI) / IEEE CBI , 2023 - Piscataway, NJ : IEEE, insges. 10 S. [Konferenz: IEEE 25th Conference on Business Informatics, CBI, Prague, Czech Republic, 21-23 June 2023]
From model to implementation - engineering of flexible production systems with RAMI 4.0
Binder, Christoph; Calà, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt
In: 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE) / IEEE International Symposium on Industrial Electronics , 2023 - Piscataway, NJ : IEEE, insges. 6 S. [Symposium: IEEE 32nd International Symposium on Industrial Electronics, ISIE, Helsinki, Finland, 19-21 June 2023]
Combining models for safety and security concerns in automating digital production
Kropatschek, Sebastian; Hollerer, Siegfried; Hoffmann, David; Winkler, Dietmar; Lüder, Arndt; Sauter, Thilo; Kastner, Wolfgang; Biffl, Stefan
In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]
Impact of modified bin picking container
Sarna, Matthias; Lüder, Arndt; Tegtmeier, André; Weist, Jens; Espericueta, Sofia
In: 2023 3rd International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) - Piscataway, NJ, USA : IEEE, insges. 7 S.
Towards flexible production systems engineering according to RAMI 4.0 by utilizing PPR notation
Binder, Christoph; Hünecke, Paula; Neureiter, Christian; Lüder, Arndt
In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 6 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]
Peer-reviewed journal article
Interdisciplinary production risk exploration - a grounded approach to integrate data- and knowledge-driven analytics
Hoffmann, David; Nowacki, Natalie; Biffl, Stefan; Kiesling, Elmar; Meixner, Kristof; Lüder, Arndt
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 120 (2023), S. 1016-1021
Lean engineering - identifying waste in engineering chains
Karch, S.; Lüder, Arndt; Listl, C.; Nowacki, Natalie S.; Hassan, K.; Werner, R.; Hohmann, T.; Müller, S.
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 120 (2023), S. 463-468
Traceable multi-view model integration - a transformation pipeline for agile production systems engineering
Rinker, Felix; Waltersdorfer, Laura; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: SN Computer Science - Singapore : Springer Singapore, Bd. 4 (2023), Heft 2, Artikel 205, insges. 25 S.
Organizing reuse for production systems engineering with capabilities and skills
Meixner, Kristof; Rinker, Felix; Waltersdorfer, Laura; Lüder, Arndt; Biffl, Stefan
In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 71 (2023), Heft 2, S. 116-127
Quo vadis Automation? - Trends für das Engineering von Automatisierungssystemen
Lüder, Arndt; Steininger, Heinrich; Goltz, Dieter
In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 71 (2023), Heft 1, S. 6-15
Dissertation
Sozio-technischer Gestaltungsansatz für die Industrie 4.0-Befähigung von Produktionssystemen
Nowacki, Natalie Samanta; Lüder, Arndt; Diedrich, Christian
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, 1 Online-Ressource (XX, 137 Seiten, 2,98 MB) [Literaturverzeichnis: Seite 117-128][Literaturverzeichnis: Seite 117-128]
Entwicklung einer fähigkeitsbasierten Planungsmethode zur Analyse der Wiederverwendbarkeit von Anlagen am Beispiel von Schraubprozessen in der Automobilendmontage
Herzog, Jan; Lüder, Arndt
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, 1 Online-Ressource (XI, 160, XII-XXIX, 2,87 MB) [Literaturverzeichnis: Seite XIII-XXVI][Literaturverzeichnis: Seite XIII-XXVI]
Planungswerkzeuge für industriefähige Griff-in-die-Kiste-Anwendungen
Sarna, Matthias; Lüder, Arndt; Katterfeld, André
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg 2023, XVIII, 134 Seiten [Literaturverzeichnis: Seite 125-134][Literaturverzeichnis: Seite 125-134]
2022
Book chapter
A coordination artifact for multi-disciplinary reuse in production systems engineering
Meixner, Kristof; Musil, Jürgen; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Designing a digital shadow for efficient, low-delay analysis of production quality risk
Kropatschek, Sebastian; Gert, Oskar; Ayatollahi, Iman; Meixner, Kristof; Kiesling, Elmar; Steinberger, Alexander; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Towards round-trip engineering to evolve complex production systems by utilizing AutomationML
Binder, Christoph; Calá, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 6 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
A bi-directional interface enabling cross-disciplinary engineering with RAMI 4.0 and AutomationML
Binder, Christoph; Neureiter, Christian; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Balanced selection in industrial bin picking
Sarna, Matthias; Espericueta, Sofia; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Efficient multi-view change management in agile production systems engineering
Rinker, Felix; Kropatschek, Sebastian; Steuer, Thorsten; Meixner, Kristof; Kiesling, Elmar; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan
In: Proceedings of the 24th International Conference on Enterprise Information Systems - Volume 1 - [Setúbal, Portugal] : SCITEPRESS - Science and Technology Publications, Lda. ; Filipe, Joaquim . - 2022, S. 134-141 [Konferenz: 24th International Conference on Enterprise Information Systems, ICEIS, Online, April 25-27, 2022]
Towards design patterns for production security
Hoffmann, David; Biffl, Stefan; Meixner, Kristof; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Digital resource models in engineering and operation - data transformation and process changes
Langosch, Martin; Listl, Carmen; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Formed workpieces in industrial Bbin picking
Sarna, Matthias; Sure, Vamsi; Lüder, Arndt; Weist, Jens
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Towards coordinating production reconfiguration
Biffl, Stefan; Meixner, Kristof; Hoffmann, David; Musil, Jürgen; Rahmani, Hossein; Lüder, Arndt
In: 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2022 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022]
Quo vadis Automation? - Trends für das Engineering von Automatisierungssystemen
Lüder, Arndt; Steininger, Heinrich; Goltz, Dieter
In: Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen / IFAT Otto-von-Guericke-Universität Magdeburg , 1. Auflage - Magdeburg : Otto-von-Guericke-Universität Magdeburg ; Jumar, Ulrich . - 2022, insges. 8 S. [Fachtagung: EKA 2022, 23.-24.06.2022, Magdeburg]
Peer-reviewed journal article
Industriefähiges Bin Picking - Taktzeit und Entkopplungsspeicher in industriellen Griff-in-die-Kiste-Anwendungen
Sarna, Matthias; Weist, Jens; Friedl, Felix; Lüder, Arndt
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb - Berlin : de Gruyter, Bd. 117 (2022), Heft 12, S. 856-861
QualSec - an automated quality-driven approach for security risk identification in cyber-physical production systems
Eckhart, Matthias; Ekelhart, Andreas; Biffl, Stefan; Lüder, Arndt; Weippl, Edgar
In: IEEE transactions on industrial informatics - New York, NY : IEEE . - 2022 [Online first]
Towards a domain-specific information architecture enabling the investigation and optimization of flexible production systems by utilizing artificial intelligence
Binder, Christoph; Neureiter, Christian; Lüder, Arndt
In: The international journal of advanced manufacturing technology - London : Springer, Bd. 123 (2022), Heft 1-2, S. 49-81
Engineering data treasures, their collection and use
Lüder, Arndt; Meixner, Kristof; Biffl, Stefan
In: IFAC-PapersOnLine / Internationale Förderung für Automatische Lenkung - Frankfurt : Elsevier, Bd. 55 (2022), Heft 10, S. 2623-2628 [Konferenz: 10th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2022, Nantes, France, 22-24 June 2022]
Das AutomationML-Komponentenmodell - Engineering-Informationen konsistent zusammenführen
Hundt, Lorenz; Wiegand, Mathias; Lüder, Arndt; Meyer, Torben
In: atp Magazin - Essen : Vulkan Verlag GmbH, Bd. 63 (2022), Heft 4, S. 78-85
Dissertation
Systematische Integration von Nichtnutzung in die Produktentwicklung
Augustin, Laura; Lüder, Arndt; Beyer, Christiane
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (XVI, 147 Seiten, 34,48 MB) [Literaturverzeichnis: Seite 121-134][Literaturverzeichnis: Seite 121-134]
Integration der Arbeitsprozessgestaltung in die Entwicklung digitaler Kollaborationssysteme - Gestaltungsmethode und Anwendung für das digitale Engineering
Eisenträger, Marlene; Lüder, Arndt; Diedrich, Christian
In: Düren: Shaker Verlag, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, VII, 143 Seiten - (Berichte aus der Arbeitswissenschaft), ISBN: 3-8440-8709-5 [Literaturverzeichnis: Seite 111-123][Literaturverzeichnis: Seite 111-123]
Agentenbasierte Steuerung virtueller Kraftwerke zur Umsetzung von Demand-Response-Mechanismen deutscher Märkte im industriellen Kontext
Woltmann, Stefan; Lüder, Arndt
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (XVIII, 196 Blätter, 10,24 MB) [Literaturverzeichnis: Blatt 155-169][Literaturverzeichnis: Blatt 155-169]
Non-peer-reviewed journal article
Managing industrial control systems security risks for cyber insurance
Dejung, Simon; Liu, Mingyuan; Lüder, Arndt; Weippl, Edgar R.
In: Dagstuhl Reports / Schloss Dagstuhl, Leibniz-Zentrum für Informatik - Wadern : Schloss Dagstuhl, Bd. 11 (2022), Heft 10, S. 36-56 [Dagstuhl Seminar 21451]
2021
Book chapter
Multi-view-model risk assessment in cyber-physical production systems engineering
Biffl, Stefan; Lüder, Arndt; Meixner, Kristof; Rinker, Felix; Eckhardt, Matthis; Winkler, Dietmar
In: MODELSWARD 2021 - [Setúbal, Portugal] : SCITEPRESS - Science and Technology Publications, Lda. ; Hammoudi, Slimane, S. 163-170 [Konferenz: MODELSWARD was, exceptionally, held as a web-based event due to the COVID-19 pandemic, from 810 February, 2021]
Modelling of behaviour
Lüder, Arndt; Schmidt, Nicole; Drath, Rainer
In: AutomationML , 1. Auflage - Berlin : De Gruyter Oldenbourg ; Drath, Rainer . - 2021, S. 213-234
Serialization of the asset administration shell by AutomationML
Lüder, Arndt; Graf, Andreas; Müller, Matthias; Schleipen, Miriam; Wiegand, Mathias; Biffl, Stefan; Drath, Rainer
In: AutomationML - Berlin : De Gruyter Oldenbourg ; Drath, Rainer . - 2021, S. 365-378
Engineering data logistics based on AML
Lüder, Arndt; Biffl, Stefan; Rinker, Felix; Behnert, Anna-Kristin
In: AutomationML - Berlin : De Gruyter Oldenbourg ; Drath, Rainer . - 2021, S. 579-602
Continuous integration in multi-view modeling - a model transformation pipeline architecture for production systems engineering
Rinker, Felix; Waltersdorfer, Laura; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: MODELSWARD 2021 - [Setúbal, Portugal] : SCITEPRESS - Science and Technology Publications, Lda. ; Hammoudi, Slimane, S. 286-293 [Konferenz: MODELSWARD was, exceptionally, held as a web-based event due to the COVID-19 pandemic, from 810 February, 2021]
An Industry 4.0 asset-based coordination artifact for production Systems Engineering
Biffl, Stefan; Musil, Jürgen; Musil, Angelika; Meixner, Kristof; Lüder, Arndt; Rinker, Felix; Weyns, Danny; Winkler, Dietmar
In: 2021 IEEE 23rd Conference on Business Informatics / IEEE CBI , 2021 - Piscataway, NJ : IEEE ; Almeida, João Paulo A., Bd. 2 (2021), S. 92-101 [Konferenz: 2021 IEEE 23rd Conference on Business Informatics, CBI, Bolzano, Italy, 1-3 September 2021]
Bereitstellungsmethoden von ungeordneten Werkstücken in den automobilen Produktionsprozess
Sarna, M.; Weist, J.; Tegtmeier, A.; Lüder, Arndt
In: Automation 2021 / Leitkongress der Mess- und Automatisierungstechnik , 2021 , 1. Auflage - Düsseldorf : VDI Verlag, S. 117-130 - (VDI-Berichte; Band 2392) [Konferenz: 22. Leitkongress der Mess- und Automatisierungstechnik, Automation 2021 (online), 29.-30. Juni 2021]
Das AutomationML Komponentenmodell
Hundt, L.; Wiegand, M.; Lüder, Arndt; Meyer, T.
In: Automation 2021 / Leitkongress der Mess- und Automatisierungstechnik , 2021 , 1. Auflage - Düsseldorf : VDI Verlag, S. 433-446 - (VDI-Berichte; Band 2392) [Kongress: 22. Leitkongress der Mess- und Automatisierungstechnik, Automation 2021 (online), 29.-30. Juni 2021]
Modelling engineered object dependencies in an AutomationML-based tool chain
Lüder, Arndt; Meixner, Kristof; Behnert, Anna-Kristin; Biffl, Stefan
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 4 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Towards efficient asset-based configuration management with a PPR asset directory
Biffl, Stefan; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 4 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Towards efficient generation of a multi-domain engineering graph with common concepts
Rinker, Felix; Meixner, Kristof; Waltersdorfer, Laura; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 4 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Reducing risk in industrial Bin Picking with PPRS configuration and dependency Management
Sarna, Matthias; Meixner, Kristof; Biffl, Stefan; Lüder, Arndt
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 4 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Big data needs and challenges in Smart Manufacturing - an industry-academia survey
Winkler, Dietmar; Korobeinykov, Alexander; Novák, Petr; Lüder, Arndt; Biffl, Stefan
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 8 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Changing a running system - a guideline for retrofitting brownfield manufacturing systems
Nowacki, Natalie Samanta; Ritter, Klaus-Christoph; Lüder, Arndt; Behnert, Anna-Kristin
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 4 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Analysis of the reusability of modules in the final automotive assembly
Herzog, Jan; Röpke, Hannes; Lüder, Arndt
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 8 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Automated model transformation in modeling digital twins of industrial internet-of-things applications utilizing AutomationML
Binder, Christoph; Calà, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 6 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Enabling model-based requirements engineering in a complex industrial system of systems environment
Binder, Christoph; Polanec, Katharina; Brankovic, Boris; Neureiter, Christian; Lastro, Goran; Lüder, Arndt
In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) , 2021 - Piscataway, NJ : IEEE, insges. 6 S. [Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021]
Utilizing an enterprise architecture framework for model-based industrial systems engineering
Binder, Christop; Leiter, Werner; Joebstl, Oliver; Mair, Lukas; Neureiter, Christian; Lüder, Arndt
In: 2021 IEEE 19th International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2021 - Piscataway, NJ : IEEE, insges. 6 S. [Konferenz: IEEE 19th International Conference on Industrial Informatics, INDIN, Palma de Mallorca, Spain, 21-23 July 2021]
Applying model-based co-simulation on modular production units in complex automation systems
Binder, Christoph; Agic, Adnan; Neureiter, Christian; Lüder, Arndt
In: 2021 IEEE International Symposium on Systems Engineering (ISSE) - Piscataway, NJ : IEEE, insges. 6 S. [Symposium: International Symposium on Systems Engineering, ISSE, Vienna, Austria,September 13 - October 13, 2021]
Enabling model-based engineering of service-oriented architectures within complex industrial systems
Binder, Christoph; Lastro, Goran; Neureiter, Christian; Lüder, Arndt
In: 2021 IEEE International Symposium on Systems Engineering (ISSE) - Piscataway, NJ : IEEE, insges. 6 S. [Symposium: International Symposium on Systems Engineering, ISSE, Vienna, Austria,September 13 - October 13, 2021]
Migrating engineering tools towards an AutomationML-based engineering pipeline
Behnert, Anna-Kristin; Rinker, Felix; Lüder, Arndt; Biffl, Stefan
In: 2021 IEEE 19th International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2021 - Piscataway, NJ : IEEE, insges. 7 S. [Konferenz: IEEE 19th International Conference on Industrial Informatics, INDIN, Palma de Mallorca, Spain, 21-23 July 2021]
25 AML-based enterprise control system integration by IEC 62264
Wally, Bernhard; Lüder, Arndt
In: AutomationML - Berlin : De Gruyter Oldenbourg ; Drath, Rainer . - 2021, S. 451-466
Patterns for reuse in production systems engineering
Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Winkler, Dietmar; Biffl, Stefan; Doppler, Christian
In: Proceedings SEKE 2021 / International Conference on Software Engineering and Knowledge Engineering , 2021 - Pittsburgh, PA : KSI Research Inc. and Knowledge Systems Institute Graduate School ; SEKE (Veranstaltung:33.:2021), S. 37-44
Peer-reviewed journal article
Decision support for frugal products and production systems based on Product-Process-Resource-Skill & Variability models
Fidan, Yazgül; Lüder, Arndt; Meixner, Kristof; Baumann, Laura; Arlinghaus, Julia C.
In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 104 (2021), S. 1619-1625
Towards a domain-specific approach enabling tool-supported Model-Based Systems Engineering of complex industrial internet-of-things applications
Binder, Christoph; Neureiter, Christian; Lüder, Arndt
In: Systems - Basel : MDPI, Bd. 9 (2021), Heft 2, Artikel 21
Scientific monograph
Quantitative performance parameters for industrial bin picking applications
Sarna, Matthias; Weist, Jens; Meixner, Kristof; Lüder, Arndt
In: Wien: Technische Universität, 2021, 1 Online-Ressource - (Technical Report; No. CDL-SQI 2021-11)
Industry 4.0 asset based requirements tracing in cyber-physical production system engineering
Biffl, Stefan; Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Rinker, Felix; Behnert, Anna-Kristin; Winkler, Dietmar
In: 2021, 1 Online-Ressource - (Technical Report; No. CDL-SQI 2021-07)
2020
Book chapter
Modeling expert knowledge for optimal CPPS resource selection for a product portfolio
Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Röpke, Hannes; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 1687-1694 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Elektronische Datenverarbeitung - agentenbasiertes Steuern
Lüder, Arndt; Vogel-Heuser, Birgit
In: Dubbel Taschenbuch für den Maschinenbau 2 , 26. Auflage 2020 - Berlin : Springer Berlin ; Bender, Beate, S. 143-150
Management der Produktvarianz in der Anlagenplanung der Automobilendmontage unter Nutzung der PPRS Modellierung
Herzog, J.; Röpke, H.; Lüder, Arndt
In: Automation 2020 / Leitkongress der Mess- und Automatisierungstechnik , 2020 - Düsseldorf : VDI Verlag GmbH, S. 549-564
Vom modelgetriebenen Engineering zum Asset-Information-Model
Lutz, J.; Lüder, Arndt
In: Automation 2020 / Leitkongress der Mess- und Automatisierungstechnik , 2020 - Düsseldorf : VDI Verlag GmbH, S. 957-970
Towards model consistency representations in a multi-disciplinary engineering network
Winkler, Dietmar; Lüder, Arndt; Meixner, Kristof; Rinker, Felix; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 1413-1416 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Towards a domain-specific language for product-process-resource constraints
Meixner, Kristof; Decker, J.; Marcher, H.; Lüder, Arndt; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 1405-1408 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Paving pathways for digitalization in engineering - common concepts in engineering chains
Lüder, Arndt; Baumann, Laura; Behnert, Anna-Kristin; Rinker, Felix; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 1401-1404 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Generating Industry 4.0 asset administration shells with data from engineering data logistics
Lüder, Arndt; Behnert, Anna-Kristin; Rinker, Felix; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 867-874 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Efficient test case generation from product and process model properties and preconditions
Meixner, Kristof; Kathrein, L.; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 859-866 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Allocation of PPRS for the plant planning in the final automotive assembly
Herzog, Jan; Röpke, Hannes; Lüder, Arndt
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 813-820 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Lessons learned from developing industrial applications according to RAMI 4.0 by applying model based systems engineering
Binder, Christoph; Brankovič, Boris; Neureiter, Christian; Lüder, Arndt
In: 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2020 - Piscataway, NJ : IEEE ; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020), S. 883-888 [Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11]
Serialisierung der Verwaltungsschale einer Industrie 4.0 Komponente mit AutomationML
Boss, Birgit; Gatterburg, Andreas; Hofmeister, Michael; Lüder, Arndt; Müller, Matthias; Schleipen, Miriam; Wiegand, Matthias
In: 16. Fachtagung EKA 2020 - Entwurf Komplexer Automatisierungssysteme: Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen / Fachtagung "Entwurf Komplexer Automatisierungssysteme" , 2020 , Auflage: 60 Exemplare - Magdeburg : ifak - Institut für Automation und Kommunikation e.V., insges. 9 S. [Tagung: 16. Fachtagung EKA 2020]
AutomationML in a nutshell
Lüder, Arndt; Schmidt, Nicole
In: Handbuch Industrie 4.0 - Wiesbaden : Springer Fachmedien Wiesbaden ; Vogel-Heuser, Birgit . - 2020, S. 1-48 [Latest version]
Quality risks in the data exchange process for collaborative CPPS engineering
Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura; Winkler, D.
In: IEEE Xplore digital library / Institute of Electrical and Electronics Engineers - New York, NY : IEEE . - 2019, S. 1217-1224 [Konferenz: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 22-25 July 2019, Helsinki, Finland]
Product/ion-aware modeling approaches that support tracing design decisions
Kathrein, Lukas; Meixner, K.; Winkler, D.; Lüder, Arndt; Biffl, Stefan
In: IEEE Xplore digital library / Institute of Electrical and Electronics Engineers - New York, NY : IEEE . - 2019, S. 118-125 [Konferenz: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 22-25 July 2019, Helsinki, Finland]
Peer-reviewed journal article
Flexibility in production systems by exploiting cyberphysical systems
Lüder, Arndt
In: Computer - Los Alamitos, Calif. : IEEE Computer Soc. Publ. Off., Bd. 53 (2020), Heft 1, S. 81-85
2019
Book chapter
Supporting the data model integrator in an engineering network by automating data integration
Lüder, Arndt; Kirchheim, Konstantin; Pauly, Johanna-Lisa; Biffl, Stefan; Waltersdorfer, Laura
In: IEEE Xplore digital library / Institute of Electrical and Electronics Engineers - New York, NY : IEEE . - 2019, S. 1229-1234 [Konferenz: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 22-25 July 2019, Helsinki, Finland]
Multi-disciplinary engineering of production systems - challenges for quality of control software
Lüder, Arndt; Pauly, Johanna-Lisa; Kirchheim, Konstantin
In: Software Quality: The Complexity and Challenges of Software Engineering and Software Quality in the Cloud - Cham : Springer International Publishing . - 2019, S. 3-13 [Konferenz: 11th International Conference, SWQD 2019, Vienna, Austria, January 15-18 2019]
Introduction to security and quality improvement in complex Cyber-Physical Systems engineering
Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar
In: Security and quality in Cyber-Physical Systems engineering - Cham : Springer Nature Switzerland AG ; Biffl, Stefan . - 2019, S. 1-29
Conclusion and outlook on security and quality of complex Cyber-Physical Systems engineering
Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar
In: Security and quality in Cyber-Physical Systems engineering - Cham : Springer Nature Switzerland AG ; Biffl, Stefan . - 2019, S. 497-507
Engineering data logistics for agile automation systems engineering
Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura; Winkler, Dietmar
In: Security and quality in Cyber-Physical Systems engineering - Cham : Springer Nature Switzerland AG ; Biffl, Stefan . - 2019, S. 187-225
Product/ion-aware analysis of collaborative systems engineering processes
Kathrein, Lukas; Lüder, Arndt; Meixner, Kristof; Winkler, Dietmar; Biffl, Stefan
In: Security and quality in Cyber-Physical Systems engineering - Cham : Springer Nature Switzerland AG ; Biffl, Stefan . - 2019, S. 151-185
Managing complexity within the engineering of product and production systems
Mehr, Rostami; Lüder, Arndt
In: Security and quality in Cyber-Physical Systems engineering - Cham : Springer Nature Switzerland AG ; Biffl, Stefan . - 2019, S. 57-79
Efficient engineering data exchange in multi-disciplinary systems engineering
Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura
In: Advanced Information Systems Engineering - Cham : Springer . - 2019, S. 17-31
Concept for deriving system architectures from reference architectures
Unverdorben, S.; Böhm, B.; Lüder, Arndt
In: 2019 IEEE International Conference on Industrial Engineering and Engineering Management , 2019 - [Piscataway, NJ] : IEEE - (2019), INSPEC Accession Number: 19318071 [Konferenz: 2019 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)]
Key directions for industrial agent based cyber-physical production systems
Karnouskos, Stamatis; Ribeiro, Luis; Leitão, Paulo; Lüder, Arndt; Vogel-Heuser, Birgit
In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 17-22 [ Published in: 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS)]
A meta-model for representing consistency as extension to the formal process description
Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 1653-1656 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]
Extending the formal process description towards consistency in product/ion-aware modeling
Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 679-686 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]
Data exchange logistics in engineering networks exploiting automated data integration
Lüder, Arndt; Pauly, Johanna-Lisa; Rinker, Felix; Biffl, Stefan
In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 657-664 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]
Efficient production system resource exploration considering product/ion requirements
Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan
In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 665-672 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]
Peer-reviewed journal article
Durchgängige Modellierung von Produktionssystemen - Daten für den Anlagenrückbau
Schmidt, Nicole; Lüder, Arndt
In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 67 (2019), Heft 3, S. 232-245
System architectures for Industrie 4.0 applications
Trunzer, Emanuel; Calà, Ambra; Leitão, Paulo; Gepp, Michael; Kinghorst, Jakob; Lüder, Arndt; Schauerte, Hubertus; Reifferscheid, Markus; Vogel-Heuser, Birgit
In: Production engineering - Berlin : Springer, Bd. 13 (2019), Heft 3/4, S. 247-257 [Special issue: Wulfsberg, J. P. (guest ed.): Small machine tools for small workpieces : paradigm change in machine tool development]
Cyber-physical production systems architecture based on multi-agent’s design pattern - comparison of selected approaches mapping four agent patterns
Cruz Salazar, Luis Alberto; Ryashentseva, Daria; Lüder, Arndt; Vogel-Heuser, Birgit
In: The international journal of advanced manufacturing technology - London : Springer . - 2019, insges. 30 S.
Dissertation
A novel migration approach towards decentralized automation in cyber-physical production systems
Calà, Ambra; Lüder, Arndt
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2019, xx, 149 Seiten [Literaturverzeichnis: Seite 113-127][Literaturverzeichnis: Seite 113-127]
Entwicklung einer Methode zur Risikobeurteilung bei der Wiederverwendung von Entwurfselementen im Anlagenengineering
Röpke, Hannes; Lüder, Arndt; Katterfeld, André
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2019, XIV, 176, XV-XVIII Blätter [Literaturverzeichnis: Blatt 154-176][Literaturverzeichnis: Blatt 154-176]
Editor
Security and quality in Cyber-Physical Systems engineering
Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar R.
In: Cham: Springer Nature Switzerland AG, 2019, xxv, 507 Seiten - (Springer eBook Collection), ISBN: 978-3-030-25312-7, |p|9783030253110
Scientific monograph
Agenten zur Realisierung von Industrie 4.0 - VDI-Statusreport : Juli 2019
Fay, Alexander; Gehlhoff, Felix; Seitz, Matthias; Vogel-Heuser, Birgit; Baumgärtel, Hartwick; Diedrich, Christian; Lüder, Arndt; Schöler, Thorsten; Sutschet, Gerhard; Verbeet, Gerhard
In: Düsseldorf: VDI, 2019, 1 Online-Ressource (24 Seiten, 1,65 MB) [Literaturverzeichnis: Seite 18-19]
2018
Book chapter
Development and evaluation of a unified agents- and supervisory control theory based manufacturing control system
Ryashentseva, Daria; Cruiz, Luis A.; Vogel-heuser, B.; Lüder, Arndt
In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) / IEEE International Conference on Automation Science and Engineering , 2018 - Piscataway, NJ : IEEE, S. 187-192 [Kongress: CASE 2018]
One step towards an industry 4.0 component
Lüder, Arndt; Schleipen, M.; Schmidt, Nicole; Pfrommer, J.; Henßen, R.
In: 2017 13th IEEE International Conference on Automation Science and Engineering (CASE) , 2017 - Piscataway, NJ : IEEE . - 2018, S. 1268-1273 [Konferenz: 13th IEEE International Conference on Automation Science and Engineering, CASE, Xi'an, China, 20-23 August 2017]
Identifying design pattern for agent based production system control
Lüder, Arndt; Zawisza, Jacek; Cruz S. Luis, A.; Seitz, Matthias; Vogel-Heuser, Birgit
In: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society - Piscataway, NJ : IEEE, S. 2896-2901 [Konferenz: 44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, DC, USA, 21-23 October 2018]
Towards Smart Factory - Multi-Agent integration on industrial standards for service-oriented communication and semantic data exchange
Rosendahl, Ronald; Calà, Ambra; Kirchheim, Konstantin; Lüder, Arndt; D'Agostino, Nikolai
In: WOA 2018, 19th Workshop "From Objects to Agents" - Aachen, Germany : RWTH Aachen ; Workshop "From Objects to Agents" (19.:2018), S. 124-132 [Konferenz: WOA 2018]
Design pattern for agent based production system control - a survey
Lüder, Arndt; Calà, Ambra; Zawisza, Jacek; Rosendahl, Ronald
In: 2017 13th IEEE International Conference on Automation Science and Engineering (CASE) - Piscataway, NJ : IEEE ; IEEE International Conference on Automation Science and Engineering (13.:2017) . - 2018, S. 717-722 [Konferenz: 13th IEEE International Conference on Automation Science and Engineering, CASE, Xi'an, China, 20-23 August 2017]
Reference architectures for future production systems in the field of discrete manufacturing
Unverdorben, Stephan; Böhm, Birthe; Lüder, Arndt
In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) / IEEE International Conference on Automation Science and Engineering , 2018 - Piscataway, NJ : IEEE, S. 869-874 [Kongress: CASE 2018]
Modelling consistency rules within production system engineering
Lüder, Arndt; Pauly, Johanna-Lisa; Wimmer, Manuel
In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) / IEEE International Conference on Automation Science and Engineering , 2018 - Piscataway, NJ : IEEE, S. 664-667 [Kongress: CASE 2018]
Support for engineering chain migration towards multi-disciplinary engineering chains
Lüder, Arndt; Pauly, Johanna-Lisa; Rosendahl, Ronald; Biffl, Stefan; Rinker, Felix
In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) / IEEE International Conference on Automation Science and Engineering , 2018 - Piscataway, NJ : IEEE, S. 671-674 [Kongress: CASE 2018]
Application of design pattern within the engineering of agent-based control systems
Zawisza, Jacek; Lüder, Arndt; Rosendahl, Ronald
In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) / IEEE International Conference on Automation Science and Engineering , 2018 - Piscataway, NJ : IEEE ; IEEE International Conference on Automation Science and Engineering (14:2018), S. 181-186 [Kongress: CASE 2018]
Designing cooperating multi-agent systems - an extended design methodology
Zavisa, Jacek; Lüder, Arndt; Calà, Ambra
In: Proceedings 2018 IEEE Industrial Cyber-Physical Systems (ICPS) - Piscataway, NJ : IEEE ; IEEE International Conference on Industrial Cyber-Physical Systems (1.:2018), S. 252-257 [Konferenz: 2018 IEEE Industrial Cyber-Physical Systems, ICPS, Saint Petersburg, Russia, 15-18 May 2018]
Migration towards digital manufacturing automation - an assessment approach
Lüder, Arndt; Calà, Ambra; Boschi, Filippo; Tavola, Giacomo; Taisch, Marco
In: Proceedings 2018 IEEE Industrial Cyber-Physical Systems (ICPS) - Piscataway, NJ : IEEE ; IEEE International Conference on Industrial Cyber-Physical Systems (1.:2018), S. 714-719 [Konferenz: 2018 IEEE Industrial Cyber-Physical Systems, ICPS, Saint Petersburg, Russia, 15-18 May 2018]
Elektronische Datenverarbeitung Agentenbasiertes Steuern
Lüder, Arndt; Vogel-Heusser, Birgit; Göhner, Peter
In: Dubbel , 25., aktualisierte Aufl. 2018 - Berlin, Heidelberg : Springer Vieweg, S. 2019-2033
Agentenmuster für flexible und rekonfigurierbare Industrie 4.0/CPS-Automatisierungs- bzw. Energiesysteme
Vogel-Heuser, B.; Ryashentseva, D.; Hoffmann, M.; Brehm, R.; Bruce-Boye, C.; Lüder, Arndt
In: 19. Leitkongress der Mess- und Automatisierungstechnik - Düsseldorf : VDI Verlag GmbH . - 2018, S. 1119-1131 [Kongress: 19. Leitkongress der Mess- und Automatisierungstechnik, 2018]
Robotic Process Automation (RPA) im Engineering - ein neuartiges Konzept zur Automatisierung von Toolprozessketten durch Ingenieure
Lutz, J.; Lüder, Arndt
In: 19. Leitkongress der Mess- und Automatisierungstechnik - Düsseldorf : VDI Verlag GmbH . - 2018, S. 759-772 [Kongress: 19. Leitkongress der Mess- und Automatisierungstechnik, 2018]
Peer-reviewed journal article
The flow and reuse of data - capabilities of AutomationML in the Production System Life Cycle
Schmidt, Nicole; Lüder, Arndt
In: IEEE industrial electronics magazine - New York, NY : IEEE, Bd. 12 (2018), Heft 2, S. 59-63
Model-based generation of run-time data collection systems exploiting AutomationML
Mazak, Alexandra; Lüder, Arndt; Wolny, Sabine; Wimmer, Manuel; Winkler, Dietmar; Kirchheim, Konstantin; Rosendahl, Ronald; Bayanifar, Hessamedin; Biffl, Stefan
In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 66 (2018), Heft 10, S. 819-833
Dissertation
Entwicklung und Integration interdependenter Agentensysteme zur dezentralen Produktionsplanung und -steuerung
Zawisza, Jacek; Lüder, Arndt; Werner, Frank
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2018, XIX, 269 Seiten [Literaturverzeichnis: Seite 219-250][Literaturverzeichnis: Seite 219-250]
Methoden der projektübergreifenden Wiederverwendung im Anlagenentwurf - Konzeptionierung und Realisierung in der Automobilindustrie
Hell, Kristofer; Lüder, Arndt; Grote, Karl-Heinrich
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2018, XVII, 194 Seiten [Literaturverzeichnis: Seite 178-190][Literaturverzeichnis: Seite 178-190]
Recovery planning method for production systems
Schmidt, Nicole; Lüder, Arndt
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2018, verschiedene Seitenzählung [Literaturverzeichnis: Seite 137-157][Literaturverzeichnis: Seite 137-157]
Article in conference proceedings
Durchgängige Modellierung von Produktionssystemen - Daten für den Anlagenrückbau
Schmidt, Nicole; Lüder, Arndt
In: Entwurf komplexer Automatisierungssysteme / EKA , 2018 - Magdeburg : Institut für Automation und Kommunikation e.V., An-Institut der Otto-von-Guericke-Universität Magdeburg, insges. 10 S. [Fachtagung: EKA 2018]
Integration kooperierender Multiagentensysteme
Zawisza, Jacek; Lüder, Arndt
In: Entwurf komplexer Automatisierungssysteme - Magdeburg : Institut für Automation und Kommunikation e.V. Magdeburg (An-Institut der Otto-von-Guericke-Universität Magdeburg) . - 2018, insges. 12 S. [Tagung: EKA 2018 : 2.-3.05.2018, Magdeburg]
Scientific monograph
Drath, Rainer; John, Michael; Lüder, Arndt; Pauly, Johanna; Prinz, Josef; Rentscher, Markus; Riedl, Matthias; Schleipen, Miriam; Schmidt, Nicole; Stecken, Jannis; Strahilov, Anton; Wally, Bernhard
In: Magdeburg: AutomationML e. V. c/o IAF, 2018, 31 Seiten
2017
Book chapter
Identification of artifacts in life cycle phases of CPPS
Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 139-167
AutomationML in a Nutshell
Lüder, Arndt; Schmidt, Nicole
In: Handbuch Industrie 4.0 Bd.2 , 2. Aufl. 2017 - Berlin, Heidelberg : Springer Vieweg ; Vogel-Heuser, Birgit *1961-*, S. 213-258
Integration des Menschen in Szenarien der Industrie 4.0
Lüder, Arndt
In: Handbuch Industrie 4.0 Bd.2 , 2. Aufl. 2017 - Berlin, Heidelberg : Springer Vieweg ; Vogel-Heuser, Birgit *1961-*, S. 259-573
Introduction to the multi-disciplinary engineering for cyber-physical production systems
Biffl, Stefan; Gerhard, Detlef; Lüder, Arndt
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 1-24
Conclusions and outlook on research for multi-disciplinary engineering for cyber-physical production systems
Biffl, Stefan; Gerhard, Detlef; Lüder, Arndt
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 459-486
Fundamentals of artifact reuse in CPPS
Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 113-138
Description means for information artifacts throughout the life cycle of CPPS
Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 169-183
Standardized information exchange within production system engineering
Lüder, Arndt; Schmidt, Nicole; Drath, Rainer
In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects - Cham, Switzerland : Springer . - 2017, S. 235-257
Harmonisierung im Kontext Industrie 4.0 AutomationML und OPC UA
Schleipen, M.; Henßen, R.; Sauer, O.; D'Agostino, N.; Damm, M.; Dogan, A.; Ladiges, J.; Gössling, A.; Holm, T.; Hoppe, S.; Lüder, Arndt; Schmidt, Nicole
In: Automation 2017 / Leitkongress der Mess- und Automatisierungstechnik , 2017 - Düsseldorf : VDI Verlag GmbH - 2017, insgesamt 8 Seiten [Kongress: Automation 2017, Baden-Baden, 27. und 28. Juni 2017]
Advancing the performance of complex manufacturing systems through agent-based production control
Lüder, Arndt
In: Multiagent system technologies - Cham : Springer International Publishing ; Berndt, Jan Ole . - 2017, S. 103-120 [Konferenz: 15th German Conference, MATES 2017 : Leipzig, Germany, August 23-26]
Challenges of mechatronical engineering of production systems: an automation system engineering view
Lüder, Arndt; Schmidt, Nicole
In: Math for the Digital Factory - Cham : Springer . - 2017, S. 93-114
Evaluation of migration scenarios towards cyber-physical production systems using SysML
Calà, Ambra; Lüder, Arndt; Vollmar, Jan; Foehr, Matthias
In: 2017 IEEE International Symposium on Systems Engineering - Piscataway, NJ : IEEE ; IEEE International Symposium on Systems Engineering (3.:2017), insges. 5 S. [Symposium: IEEE International Symposium on Systems Engineering, ISSE 2017, Vienna, Austria, October 11-13, 2017]
Migration from traditional towards cyber-physical production systems
Calà, Ambra; Lüder, Arndt; Cachada, Ana; Pires, Flavia; Barbosa, Jose; Leitao, Paulo; Gepp, Michael
In: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN) - Piscataway, NJ : IEEE ; IEEE International Conference on Industrial Informatics (15.:2017), S. 1147-1152 [Konferenz: 15th International Conference on Industrial Informatics, INDIN, Emden, Germany, 24-26 July 2017]
End-of-Life support for production systems
Schmidt, Nicole; Lüder, Arndt
In: 13. Magdeburger Maschinenbau-Tage 2017 , 2017 - Magdeburg : Universitätsbibliothek, S. 438-444 [Konferenz: MMT2017]
Agentenbasierte Steuerung eines Routenzugsystems für die werksinterne Materiallogistik einer Automobilendmontage
Zawisza, Jacek; Habermann, Rebecca; Lüder, Arndt
In: 13. Magdeburger Maschinenbau-Tage 2017 - Magdeburg : Universitätsbibliothek, S. 64-73 [Konferenz: MMT2017]
Peer-reviewed journal article
Development of a generic model for end-of-life scenarios of production systems
Schmidt, Nicole; Lüder, Arndt
In: Procedia manufacturing - Amsterdam [u.a.] : Elsevier, Bd. 8 (2017), S. 385-392 [Kongress: 14th Global Conference on Sustainable Manufacturing, GCSM 3-5 October 2016, Stellenbosch, South Africa]
Dissertation
Zur Internationalisierung von Engineering für Großanlagen in der Elektroindustrie
Schäffler, Thomas; Lüder, Arndt; Vajna, Sándor
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2017, xxxiv, 284 Seiten [Literaturverzeichnis: Seite 255-284][Literaturverzeichnis: Seite 255-284]
Editor
Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects
Biffl, Stefan; Lüder, Arndt; Gerhard, Detlef
In: Cham, Switzerland: Springer, 2017, xii, 472 Seiten, ISBN: 3-319-56344-0 [Includes bibliographical references and index]
2016
Abstract
Development of a generic model for End-of-Life scenarios of production systems
Schmidt, Nicole; Lüder, Arndt
In: 14th Global Conference on Sustainable Manufacturing Decoupling Growth from Resource Use - CIRP . - 2016, S. 44 [Kongress: 14th Global Conference on Sustainable Manufacturing Decoupling Growth from Resource Use, Stellenbosch, South Africa, 3rd - 5th October, 2016]
Book chapter
Qualitätsorientierte Modellierung von Produktionssystemverhalten
Lüder, Arndt; Schmidt, Nicole; Calà, Ambra; Ryashentseva, Daria; Schulz, Nadine
In: Entwurf komplexer Automatisierungssysteme - EKA 2016 ; Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen ; 14. Fachtagung mit Tutorium ; 24. bis 25. Mai 2016 in Magdeburg , 2016 , Auflage: 60 Exemplare - Magdeburg : Inst. für Automation und Kommunikation e.V., insges. 15 S.
Multi-disciplinary engineering for Industrie 4.0 - semantic challenges and needs
Biffl, Stefan; Lüder, Arndt; Winkler, Dietmar
In: Semantic web technologies for intelligent engineering applications - Cham : Springer International Publishing . - 2016, S. 17-51
Analyzing the causes and effects of complexity on different levels of automobile manufacturing systems
Mir Rashed, Seyedarya; Rostami Mehr, Mohammad; Mißler-Behr, Magdalena; Lüder, Arndt
In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2016, insges. 4 S. [Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]
Demands on virtual representation of physical Industrie 4.0 components
Hell, Kristofer; Hillmann, Robin; Lüder, Arndt; Röpke, Hannes; Zawisza, Jacek; Schmidt, Nicole; Calà, Ambra
In: CEUR workshop proceedings - Aachen : RWTH, Bd. 1728 (2016), S. 65-71 [Kongress: 2nd INCOSE Italia Conference on Systems Engineering, Turin, Italy, November 14-16, 2016]
A generic model for the end-of-life phase of production systems
Schmidt, Nicole; Lüder, Arndt; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek
In: IECON 2016 - Piscataway, NJ : IEEE, S. 5693-5698 [Kongress: 42th Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 24. - 27. October, 2016]
Identification of "Industrie 4.0" component hierarchy layers
Röpke, Hannes; Hell, Kristofer; Zawisza, Jacek; Lüder, Arndt; Schmidt, Nicole
In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2016, insges. 8 S. [Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]
Lossless exchange of automation project configuration data
Lüder, Arndt; Schmidt, Nicole; John, Michael
In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2016, insges. 8 S. [Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]
Modeling approach for a flexible manufacturing control system
Calà, Ambra; Ryashentseva, Daria; Lüder, Arndt
In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2016, insges. 4 S. [Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]
Updating probabilistic method of the fuzzy control model's parameters of the production facilities
Finaev, Valery; Sinjavskaya, Ekaterina; Lüder, Arndt; Ryashentseva, Daria
In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2016, insges. 7 S. [Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]
Herstellerunabhängiger Austausch von Verhaltensmodellen mittels AutomationML
Lüder, Arndt; Schmidt, Nicole; Yemenicioglu, Ender
In: Automation 2016 / Branchentreff der Mess- und Automatisierungstechnik , 2016 , Nichtredigierter Manuskriptdruck - Düsseldorf : VDI Verlag GmbH, insges. 16 S. - (VDI-Berichte; 2284) [Kongress: Automation 2016, 07. und 08. Juni 2016, Baden-Baden]
Generische Strukturierung von Produktionssystemen der Fertigungsindustrie
Zawisza, J.; Hell, K.; Röpke, H.; Lüder, Arndt; Schmidt, Nicole
In: Automation 2016 / Branchentreff der Mess- und Automatisierungstechnik , 2016 , Nichtredigierter Manuskriptdruck - Düsseldorf : VDI Verlag GmbH, insges. 16 S. - (VDI-Berichte; 2284) [Kongress: Automation 2016, 07. und 08. Juni 2016, Baden-Baden]
Peer-reviewed journal article
Cross-disciplinary engineering with AutomationML and SysML
Berardinelli, Luca; Biffl, Stefan; Lüder, Arndt; Mätzler, Emanuel; Mayerhofer, Tanja; Wimmer, Manuel; Wolny, Sabine
In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 64 (2016), Heft 4, S. 253-269
Wiederverwendung im Engineering
Hell, Kristofer; Lüder, Arndt
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb - Berlin : de Gruyter . - 2016, Heft 6, S. 337-341
Dissertation
Agents and SCT based self* control architecture for production systems
Ryashentseva, Daria; Lüder, Arndt; Kühnle, Hermann
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2016, xxiii, 142 Seiten [Literaturverzeichnis: Seite 113-121][Literaturverzeichnis: Seite 113-121]
2015
Book chapter
Industrie 4.0 Wertschöpfungsnetzwerke in Bestandsanlagen
Rosendahl, Ronald; Lüder, Arndt; Ryashentseva, Daria; Schmidt, Nicole
In: Automation 2015 / Branchentreff der Mess- und Automatisierungstechnik , 2015 - Düsseldorf : VDI-Verl., S. 987
Agent-based control of production systems- and its architectural challenges
Vogel-Heuser, Birgit; Göhner, Peter; Lüder, Arndt
In: Industrial agents - Amsterdam, Netherlands : Elsevier ; Leitão, Paulo . - 2015, S. 153-170
Integration des Menschen in Szenarien der Industrie 4.0
Lüder, Arndt
In: Handbuch Industrie 4.0 - Wiesbaden : Springer Fachmedien Wiesbaden ; Vogel-Heuser, Birgit . - 2015, insges. 15 S.
AutomationML in a nutshell
Lüder, Arndt; Schmidt, Nicole
In: Handbuch Industrie 4.0 - Wiesbaden : Springer Fachmedien Wiesbaden ; Vogel-Heuser, Birgit . - 2015, S. 1-46
Operating articulated objects with force sensitive mobile manipulators
Hanses, Magnus; Walter, Christoph; Lüder, Arndt
In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2015, insges. 4 S.
AutomationML - Semantic Web technologies vs. Model-Driven Engineering
Kovalenko, Olga; Wimmer, Manuel; Sabou, Marta; Lüder, Arndt; Ekaputra, Fajar J.; Biffl, Stefan
In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2015, insges. 4 S.
Identification and implementation of agents for factory automation exploiting mechatronical concepts for production system structuring
Lüder, Arndt; Foehr, Matthias
In: Industrial agents - Amsterdam, Netherlands : Elsevier ; Leitão, Paulo . - 2015, S. 171-190
Linking and versioning support for AutomationML - a model-driven engineering perspective
Biffl, S.; Maetzler, E.; Wimmer, M.; Lüder, Arndt; Schmidt, Nicole
In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ : IEEE, S. 499-506
Herstellerunabhängiger Austausch von Entwurfsdaten für Steuerungssysteme mittels AutomationML
Lüder, Arndt; Schmidt, Nicole
In: Industrie 4.0 im internationalen Kontext - Berlin : VDE-Verl. [u.a.] . - 2015, S. 107-132
For a better understanding of integration
Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan
In: IECON 2015 - Piscataway, NJ : IEEE, S. 2717-2722
Objektivierung der Prozess -FMEA durch den Einsatz eines Risikokubus
Röpke, Hannes; Schütze, Oliver; Lüder, Arndt
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 - Magdeburg : Otto-von-Guericke-Universität Magdeburg - 2015, Beitrag A8-3, insgesamt 9 S. Kongress: Magdeburger Maschinenbau-Tage 12 Magdeburg 2015.09.30-10.01
Herstellerunabhängiger Austausch von Entwurfsdaten für Steuerungssysteme mittels AutomationML
Lüder, Arndt; Schmidt, Nicole
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 , 2015 - Magdeburg : Otto-von-Guericke-Universität Magdeburg - 2015, Beitrag C5-1, insgesamt 16 S. Kongress: Magdeburger Maschinenbau-Tage 12 Magdeburg 2015.09.30-10.01
Austausch von Prozessbeschreibungen zwischen Engineering- und Laufzeitsystemen im Industrie 4.0 Umfeld mittels AutomationML
Lüder, Arndt; Schmidt, Nicole; Matzke, Daniel
In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 , 2015 - Magdeburg : Otto-von-Guericke-Universität Magdeburg - 2015, Beitrag C5-3, insgesamt 11 S. Kongress: Magdeburger Maschinenbau-Tage 12 Magdeburg 2015.09.30-10.01
An optimization approach within supervisor architecture for boiler control
Ryashentseva, Daria; Lüder, Arndt; Rosendahl, Ronald; Finaev, Valerij
In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2015, insges. 4 S.
Data exchange toward PLC programming and virtual commissioning
Lüder, Arndt; Schmidt, Nicole; Rosendahl, Ronald
In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ : IEEE - 2015, Art. CD-005134, S. 492-498
Characterizing integration approaches - identifying integration approach candidates for use in industrie 4.0
Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan
In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ : IEEE - 2015, Art. CD-005126, S. 527-532
Surveying integration approaches for relevance in cyber physical production systems
Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan
In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE . - 2015, insges. 8 S.
Online Evaluation of Manipulation Tasks für Mobile Robots in Industry 4.0 Scenarios
Zug, Sebastian; Wilske, Stefan; Steup, Christoph; Lüder, Arndt
In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ : IEEE - 2015, Art. ETFA2015 181, insgesamt 7 S.
Due to technical reasons only 200 publications can be displayed.
View more in the research portal.